Sigpatches for Atmosphere (Hekate, fss0, fusee & package3) (2025)

ShadowOne333 said:

Sigpatches have been updated for firmware 16.0.3 and Atmosphere's v1.5.3. Thanks to impeeza for the new patches, as always

Click to expand...

This time was @mrdude I felt asleep before be able to put my hands on the new firmware.

impeeza said:

This time was @mrdude I felt asleep before be able to put my hands on the new firmware.

Click to expand...

Even the best of us need to sleep dude, but still thanks anyway.

mrdude said:

Even the best of us need to sleep dude, but still thanks anyway.

Click to expand...

Thanks a lot to you, you are the one which has dedicated a lot of work and effort to the community, without that work this thread will not be possible.

A big left-hand shake for you my friend.

Heck I'm still getting "NCA signature verification failed" when I try to install something, despite updating (i.e. drag-dropping and overwriting) the exefs_patches and kip_patches (and patches.ini). I thought that was all that I needed do? Updated to the latest Atmosphere + Hekate through AIO.

Everything that is already installed runs just fine.

Edit: hmm, actually it looks like I'm on fw 16.0 when I thought it was 16.0.2, so I'mma get another set of sigpatches...
Edit 2: nope that didn't help either, actually only made Tinfoil stop working - so now I'm back on the sigpatches for 16.0.2 again

ConraDargo said:

Heck I'm still getting "NCA signature verification failed" when I try to install something, despite updating (i.e. drag-dropping and overwriting) the exefs_patches and kip_patches (and patches.ini). I thought that was all that I needed do? Updated to the latest Atmosphere + Hekate through AIO.

Everything that is already installed runs just fine.

Edit: hmm, actually it looks like I'm on fw 16.0 when I thought it was 16.0.2, so I'mma get another set of sigpatches...
Edit 2: nope that didn't help either, actually only made Tinfoil stop working - so now I'm back on the sigpatches for 16.0.2 again

Click to expand...

i thought the latest sigpatches was for 16.0.3?

KOSpades said:

i thought the latest sigpatches was for 16.0.3?

Click to expand...

I thought I had to download the patches for whatever I'm currently running? >_> Because I went ahead and downloaded a "sigpatches-1.5.2-cfw-16.0.2" file.
(even though apparently I'm running 16.0.0 and these patches still allow me to run Tinfoil and whatever else I already have installed)

T

ConraDargo said:

I thought I had to download the patches for whatever I'm currently running? >_> Because I went ahead and downloaded a "sigpatches-1.5.2-cfw-16.0.2" file.
(even though apparently I'm running 16.0.0 and these patches still allow me to run Tinfoil and whatever else I already have installed)

Click to expand...

The sigpatches in the OP of this thread contain patches for the current version of Switch firmware and Atmosphere AND all previous versions aswell. So they work no matter what version you are on

I'll just reinstall Hekate and Atmosphere and update the firmware again, will try that out later. I guess it could also be something wrong with the .nsp (that I'm trying to install).
(I used the sigpatches of this thread instead and everything works fine - except for installing this, which still gives me a NCA error)

Edit: unless, ofc, it's got something to do with emummc and that I need to do something here first, but I'm just too silly-stupid and off-the-scene to know better?
Edit 2: yup I just managed to install something else, so it's just a bad nsp then. Hecking converted nsps can never be fully trusted
Edit 3: huh, tried Goldleaf again and this time around - with the latest sigs - it actually installed the nsp! Sweeeet

I have a problem. In Zelda TOTK everytime I pickup a skyshroom the game freezes and the install becomes currupted. Only desinstaling the update or the game and reinstalling works.

I have firmware 16.0.3 with atmosphere 1.5.3 zelda 1.1.0

Post automatically merged: May 12, 2023

I have

jfsaoliveira said:

I have a problem. In Zelda TOTK everytime I pickup a skyshroom the game freezes and the install becomes currupted. Only desinstaling the update or the game and reinstalling works.

I have firmware 16.0.3 with atmosphere 1.5.3 zelda 1.1.0

Click to expand...

SOLVED. My microsd card was the issue. Tryed a new one and I can pickup shyshrooms withou any freeze.

jfsaoliveira said:

I have a problem. In Zelda TOTK everytime I pickup a skyshroom the game freezes and the install becomes currupted. Only desinstaling the update or the game and reinstalling works.

I have firmware 16.0.3 with atmosphere 1.5.3 zelda 1.1.0

Post automatically merged: May 12, 2023

I have

SOLVED. My microsd card was the issue. Tryed a new one and I can pickup shyshrooms withou any freeze.

Click to expand...

which one did u used and which did u change over? imean brand of them

Maybe I'm doing something wrong but ever since I last updated my atmosphere, firmware and sigpatches to the current version, CFW won't fully boot. It will without fail end up at a yellow text screen with a Atmosphere panic at title 010000000000002B failure with std::abort (0xFEE).

This happens (as far I can tell) as soon as I add the exefs_patches or kip_patches directories to atmosphere, but I wouldn't be able to tell if it's just the fact that the folders exist, or a particular file therein, since there's far too many of them to test them individually. Tried a default atmosphere (on its own SD card) and it booted without issues, but as soon as I had to add sigpatches to the directory, it errored out with that panic. Curiously enough, bootloader/patches.ini is not erroring out besides the normal message that nosigpatch can't be found.

Hello, when im trying to install a nsp file format game, goldleaf gives error 2002-4058 (0x1fb402)
I have the latest sigpatches from a topic in this forum, the newest switch firmwire and the newest atmosphere. 16.0.3 AMS 1.5.3.

Does someone know what I'm doing wrong?

Zack1993 said:

Hello, when im trying to install a nsp file format game, goldleaf gives error 2002-4058 (0x1fb402)
I have the latest sigpatches from a topic in this forum, the newest switch firmwire and the newest atmosphere. 16.0.3 AMS 1.5.3.

Does someone know what I'm doing wrong?

Click to expand...

Are you using the latest goldleaf?

eskirol said:

Is new sigpatche needed for ams 1.5.4?

Click to expand...

Add this to patches.ini

[Loader:BFD7A2BE8D4FEBD5].nosigchk=0:0x5F7E:0x1:01,00

Thanks @mrdude